Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Liner & Rebuild in Passaic: What to Know First
As an independent Olympia Chimney service provider, we handle chimney liner installation, replacement, and full rebuilds across Passaic homes. Most Olympia liner jobs in Passaic take one full day from setup to final camera check, and we quote a flat price before any work begins. You’ll know the number over the phone, and the number on the invoice will match it. If you own an Olympia Chimney system and the liner is showing its age, call (551) 368-8859 and Wendell will walk you through what’s actually needed.
This page is for Passaic homeowners with an Olympia Chimney unit who’ve been told the liner is cracked, rusted, or gone. You want straight answers about what that means, what it costs, and whether it can wait. Read on and you’ll get them.
Key Takeaways:
- Olympia Chimney liners in Passaic fail most often from condensation and freeze-thaw cycles, not from fire damage.
- Full liner replacement on an Olympia system typically runs $1,800 to $4,200 in Passaic, depending on flue height and access.
- Every job includes camera inspection before and after, plus our 90-Day Done Right Promise in writing.
- We’ll tell you plainly if the liner can wait. If it doesn’t need doing, Wendell will say so.
How Olympia Chimney Products Fail - and How We Fix Them
Olympia Chimney makes a solid product, but no liner lasts forever, especially in Passaic’s wet winters and old masonry. Here’s what we actually see on Olympia systems in this area, and what we do about it.
- Condensation pitting on older Olympia stainless liners. Many Passaic homes run gas appliances through Olympia flexible liners installed in the 1990s and early 2000s. Gas exhaust runs cooler than wood smoke, so condensation forms inside the liner, sits in the low spots, and eats pinholes through the stainless over 15 to 20 years. We see this most on Olympia’s older flexible liner kits in Passaic rowhouses along Gregory Avenue and up toward the train station. The fix is a full liner replacement, and we’ll show you the pinholes on camera before we touch anything.
- Failed liner-to-appliance connectors on Olympia gas installations. The aluminum or thin-gauge adapter sections that join an Olympia liner to the furnace or water heater corrode faster than the liner itself. That’s where we find the first carbon monoxide leak on a lot of Passaic gas systems. The repair is straightforward: replace the connector, check the whole run for gaps, and pressure-test the draft. It’s a few hundred dollars instead of a few thousand, and catching it early matters.
- Crushed or twisted flexible liners from original installs. Olympia flexible liners are good quality, but plenty of installers in this area cut corners years ago. We pull out liners that were kinked on the way down the flue, restricting the draft and forcing exhaust back into the house. Your flute doesn’t care how the fire looks. It cares how it breathes. On an Olympia wood-burning setup, a kinked liner means weak draw, smoke-soaked rooms, and creosote building up in the folds. We replace the liner with a properly sized run and verify the draft with a draft gauge before we wrap up.
- Freeze-thaw damage on the brick around Olympia flues. This isn’t the liner itself, but it’s why Passaic homeowners call us about Olympia rebuilds. Water gets into the masonry on the outside of the chimney, Passaic winters freeze it, and the bricks spall and crack. If the structure around the Olympia liner is compromised, the liner can shift, and a shifted liner creates gaps at the joints. A partial rebuild of the crown and the top courses of brick runs $2,500 to $6,000 in Passaic depending on how far down the damage goes.
- Warped or rusted caps on Olympia factory chimneys. The stamped metal caps that come with many Olympia prefab chimney units don’t stand up to Passaic rain and snow the way our local climate demands. Once the cap warps, water runs straight down the flue, rusting the liner from the top down. We stock better-fitting replacement caps and can swap one in the same visit as a liner inspection. Ask anyone on your street: in Passaic, the cap usually goes first.
And one more thing we run into enough to mention it: Olympia prefab systems from the 1980s sometimes use a two-wall flue that was recalled or superseded. If you’ve got an older Olympia air-cooled chimney in Passaic, call us before you burn again. We’ll tell you on camera what you’ve got, and if it’s safer to replace than to repair.
Our Olympia Chimney Chimney Liner & Rebuild Process
Here’s how a typical Olympia Chimney liner or rebuild job goes when you call Top Hat Chimney.
- 1
The call. You reach a live person, even at 2 a.m. We ask what Olympia system you have, what symptoms you’re seeing, and whether you’ve had any other work done. We give you a ballpark over the phone and schedule a visit.
- 2
The camera inspection. Wendell or one of his crew runs a camera through the Olympia flue and shows you the footage on a screen, not a phone held at arm’s length. You see exactly what needs doing. Every time, no exceptions.
- 3
The parts decision. For Olympia jobs, we use genuine Olympia parts when they’re the best fit, and quality aftermarket liners from DuraFlex or HeatShield when they do the job better for less. We’ll explain the difference and the warranty on each.
- 4
The flat-price quote. Before a single tool comes off the truck, you get a written price. That’s the number you pay. No change orders for surprises we should have seen on camera.
- 5
The work. Liner removal, prep, and install or rebuild happen in one day. We protect your Passaic rugs and floors, run a drop cloth from the door to the hearth, and clean up before we go.
- 6
The test and the guarantee. We run the draft check, fire the system if it’s safe, and hand you the 90-Day Done Right Promise in writing. If something’s not right, one call brings us back at no charge.
What Olympia Chimney Chimney Liner & Rebuild Costs in Passaic
Here are the price ranges we typically see for Olympia Chimney work in Passaic. These are flat ranges, not bait numbers. What moves the price up or down is flue height, roof pitch, whether the liner comes out clean or puts up a fight, and whether the brick around it needs rebuilding too.
| Job | Typical Price in Passaic |
|---|---|
| Olympia liner inspection with camera | $150, waived if you proceed with repair |
| Connector or cap replacement | $200 to $450 |
| Flexible liner replacement (single flue) | $1,800 to $3,200 |
| Stainless steel liner with insulation | $2,400 to $4,200 |
| Partial rebuild (crown and top courses) | $2,500 to $6,000 |
| Full chimney rebuild | $8,000 to $14,000+ |
We’re happy to put a number on your specific Olympia system. Estimates are free, and so is a second opinion on any written estimate you’ve got from another Passaic outfit. Call (551) 368-8859.
Why Passaic Homeowners Call Top Hat Chimney for Olympia Chimney Work
We’ve been working in Passaic since 1999, which means we’ve been inside more Olympia flues in this city than any franchise crew that rotated in last spring. Wendell Pike puts his name on the work, and he runs into you again on Saturday at the hardware store. That matters more than any warranty card.
Every Olympia Chimney liner and rebuild job we do carries the 90-Day Done Right Promise: if it’s not right, one call brings us back. We answer our own phones, around the clock, and the person who picks up knows chimneys, not a call script. And since we work with Olympia, DuraFlex, HeatShield, and Gelco, we’re not stuck pushing one brand when another fits your Passaic home better.
Standing offers you should know about: $40 off any repair over $200, free second opinion on any competing written estimate, no trip charge inside our service county, and 10% off always for seniors and veterans.
FAQs
An Olympia stainless liner properly installed in a Passaic home typically lasts 15 to 25 years, but gas appliances can shorten that to 10 to 15 years because of condensation. The freeze-thaw cycles in Passaic masonry put extra stress on the structure around the liner, so the real lifespan often comes down to how well the crown and cap have kept water out. If your liner is over 15 years old, a camera inspection will tell you where you stand. Call (551) 368-8859 and we’ll schedule one.
No, and in some cases an Olympia system is better served by a different brand’s part. When we do chimney liner work on an Olympia unit in Passaic, we use genuine Olympia components where they’re the right fit, and proven aftermarket parts from DuraFlex or HeatShield where they’ll last longer or save you money. We’ll show you the difference on the invoice and explain the warranty on both.
Sometimes we can repair an Olympia liner, particularly if the damage is confined to a connector, a cap, or a single joint near an appliance. But if the stainless is pitted through in multiple spots, we’ll recommend replacement, and we’ll have the camera footage to show you why. If it doesn’t need doing, Wendell will tell you so. If it does, the replacement is flat-priced before we start.
Most Olympia liner replacements in Passaic are done in one day from setup to final draft test. Partial rebuilds take two to three days depending on how many courses of brick come down. Full rebuilds run a week, weather permitting. Call (551) 368-8859 and we’ll give you a realistic window for your specific job.
Yes, if the smoke smell is coming from a cracked or kinked liner. In Passaic rowhouses, it’s common for adjacent flues to share a party wall, and a damaged Olympia liner in one unit can push smoke into the one next door. The camera inspection will show whether the liner is the culprit, and the fix is usually straightforward once we know what we’re dealing with.
Written by Wendell Pike, Owner, Top Hat Chimney - Passaic, NJ, serving Passaic and nearby areas.





Before
After
Before
After
Before
After